AUDIO ANALOGUE FORTISSIMO 3300

Nuevo

Amplificador integrado 100W.

Powered by AIRTECH TECHNOLOGY.

Disponible en Silver y Black.

Más detalles

1 860,00 €

Más

The Fortissimo Integrated Amplifier is the newcomer in the Audio Analogue ArmoniA line. It shares the line philosophy: maximizing value for money. But not only! The Fortissimo Integrated Amplifier further develops our concept about what an integrated amplifier is. In fact, we believe that the integrated amplifier has to be the interface between the loudspeakers and many different audio systems guaranteeing the best audio performance at all times.

 

Features:

•  Toroidal transformer analogue power supply with 2 separated lines:
   1.Power amplifier supply.
   2.All Preamp and small signal sections power supply.
•  Separated supply  section for each power amplifier channel.
•  4-layer board to minimize the track length and avoid interference between

    different stages.
•  Low noise Solid state Input selector circuits.
•  Highest-end quality  volume control.
•  Low-noise, low-distortion Pre amp stage. 
•  Automatic thermal tracking power stage.
•  Integrated electronic protection designed to work against overloading and overheating with the less interference

    on the audio performance.
•  Settable Pre/Rec output.
•  Phones output.
•  Digital SPDIF output giving the selected digital input.
•  16-24 bit Optical digital input accepting a sample frequency as wide as 108KHz. The input can also be set in

    ByPass Mode and the gain in bypass mode can be changed in the range of +/-10dB. 
•  16-24 bit Coaxial digital input accepting a sample frequency as wide as 108KHz. The input can also be set in

    ByPass Mode and the gain in bypass mode can be changed in the range of +/-10dB.  
•  Low noise low distortion balanced input.
•  16Bit USB connection accepting sample frequency as wide as 48KHz.
•  Preamp MM/MC Phono stage with settable gain and input impedance.
•  Line input on the front panel.
•  3 Stereo RCA Inputs. 
•  1 Stereo RCA input settable into ByPass mode. When the input is set in BY-Pass mode the gain can be changed

    in the range of +/-10dB. 
•  RecUSB output carrying the preamplified audio signal to the PC/MAC.
•  Trigger In Input, by which is possible to turn on the unit via a 12VDC trigger signal.
•  Highest-end quality passive components.
•  Microcontroller based equipment management.

Parameter 

Value 

 

 

 

 

Dimensions (Nota1) 

4.6 x 17,5 x 15,4 “ 

 

 

 

 

Weight 

27,6 Lbs 

 

 

 

 

Overall Signal chain gain 

36 dB 

 

 

 

 

Unbalanced Line input impedance 

60 KOhm 

 

 

 

 

Balanced Line input impedance  

20KOhm (differential input impedance ) 1MOhm (Impedance on each phase ) 

 

 

 

 

Phono Input Impedence 

MM (47K or 47K//150pF) MC (100R or 50R) 

 

 

 

 

Frequency response (Nota2) 

120 KHz 

 

 

 

 

Noise Level (Nota5) 

< -110 dBV 

 

 

 

 

SNR (Nota3) 

> 100 dB 

 

 

 

 

Output power on 8Ohm load (Nota4) 

100W @ 0.015% THD + N 

 

 

 

 

Output Power on 4Ohm load (Nota4) 

180W @ 0.3% THD + N 

 

 

 

 

Inputs 

4 Unbalanced Inputs + 1 Balanced Input + 1 Frontal Input + 1 Phono MM/MC Input + 1 Optical Input + 1 Coaxial Input + 1 USB Input  

 

 

 

 

Outputs 

REC/PRE Output + Phone Output + SPDIF Output + USBREC Output + Trigger IN