With its wing-shaped aluminum column, tapered top and base plates and internal cable management system, the Stand 6 yields a modern appearance from any loudspeaker. But in contrast to many other design-oriented speaker stands, the Dynaudio Stand 6 was also engineered to improve the loudspeakers' performance: The highly-rigid, low-mass aluminum columns are internally braced, while the top plates and base plates feature a three-layer construction with a special damping sheet to eliminate resonance. The Stand 6 column can also be filled with dry sand or any other suitable damping material for further damping and additional mass.
The loudspeaker cable can be neatly concealed, running directly through the base plate into the channel in the rear section of the column, and re-appearing just underneath the top plate. The openings are wide enough to allow virtually all cable and connectors to go through. Loudspeakers may be positioned on the Stand 6 top plate using either the included soft damping stickers or the supplied spikes. The lower base plate is also fitted with spikes, which are adjustable in order to achieve a perfect foundation on un-level floors.
Dedicated Stand 6 top adapter plates are available specifically for mounting the Dynaudio Confidence C1 and Contour S 1.4 loudspeaker models: With the available loudspeaker adapter pack, the C1 or S 1.4 base plinth fits perfectly onto the Stand 6.
The Dynaudio Stand 6 is available in a choice of High-gloss Black, High-gloss White, Silver or Black finishes, allowing it to perfectly complement any loudspeaker and any room or décor.
Height (with spikes):640 mm / 25.1"Dimensions Top Plate:235 x 168 mm / 9.3 x 6.6" Dimensions Base Plate:320 x 235 mm / 12.6 x 9.3" Weight:8.5 kg / 18.7 lbs Colours:High-gloss white, High-gloss black,silver, black